[. . . ] ⷠChildren should be supervised to ensure that they do not play with the appliance. 0 Remove the carbon filter from the plastic packaging and rinse it thoroughly under running water. 0 Place the filter holder in the container and lock by turning it clockwise (Figure 6). [. . . ] If the green lamp has already ceased to flash before the settings are completed, press button AUTO (Figure 2/F) again and continue with the programming. At the start time, the green indicator (Figure 2/F) will go out and the red indicator next to the button (Figure 2/B) will be illuminated. Coffee using the coffee grinder You can prepare coffee with beans either immediately (, , Normal mode"), or by pre-programming the start time (, , Auto" function. For preparing coffee with beans you must set number of cups, coffee strength and where required the aroma setting. Number of cups Button 2-10 (Figure 2/G) is for setting how many cups are to be prepared. Coffee strength Button (Figure 2/D) is for setting the coffee strength. The symbols for coffee strength have the following significance: weak coffee medium coffee strong coffee Aroma setting The aroma setting guarantees full coffee enjoyment even with small quantities (2-4 cups). The aroma setting can only be selected, if or cups are set with the button 2-10 (Figure 2/G). 0 Pressing the button 2-4 again changes between the number of cups and , the aroma setting remains on. 0 To cancel the aroma setting, press button 2-10 (Figure 2/G), the symbol will go out and the number of cups lights. 2 Preparing coffee using the coffee grinder with pre-programming of the start time (, , Auto" function) 0 Swing out the water supply (Figure 1/D) using the swivel lever (Figure 1/H) until it engages (Figure 13). programming the , , Auto"function: 0 Press button PROG (Figure 2/K). The following settings must be made whilst the green lamp is flashing. Swing out the water supply (Figure 1/D) using the swivel lever (Figure 1/H) until it engages (Figure 13). : 4 cups: medium strength, with aroma setting ­ the display shows: Once the coffee has been ground, the water supply swings back automatically to the brewing position and brewing begins. If the green lamp has already ceased to flash before the settings are completed, press button AUTO (Figure 2/F) again and continue with the programming. [. . . ] If you are using a gold filter, remove it from the filter insert before descaling. Use only an environmentally friendly descaling agent and always follow the manufacturer's instructions. First fill the fresh water container with water and then add the descaling agent. [. . . ]